• simple installation, with EASY-Clamping hub on both sides
• 6-corrugation bellows – cost-effective standard series
• Torque range: 20 – 1.300 Nm
• Shaft diameter: 8 – 85 m

• simple installation with radial EASY-clamping hub on both sides
• 4-corrugation bellows – short design – high torsional stiffness
• Torque range: 25 – 900 Nm
• Shaft diameter: 10 – 75 mm

• simple installation with radial EASY-clamping hub on both sides
• straight bellow – long design
• low restoring forces – high torsional stiffness
• Torque range: 25 – 1.500 Nm
• Shaft diameter: 8 – 85 mm

• simple installation – splitted hub design on both sides
• stainless design – variable length
• Torque range: 10 – 900 Nm
• Shaft diameter: 6 – 55 mm

• simple installation with radial EASY-clamping hub on both sides
• steel hub – welded design – temperatures up to 300°C
• 2-, 4- or 6-corrugation bellows – short design – high torsional stiffness
• Torque range: 40 – 3.000 Nm
• Shaft diameter: 12 – 100 mm
» KG-VA = stainless steel optional

• simple installation – splitted hub design on both sides
• steel hub – welded design – temperatures up to 350°C
• customized length with 2-, 4- or 6-corrugation bellows
• Torque range: 20 – 1800 Nm
• Shaft diameter: 8 – 85 mm

• High-speed version for the highest operating speeds
• Rotationally symmetrical clamping hub for optimum balancing quality

• conical hub on both sides
• 6-corrugation bellows
• Torque range: 10 – 4.000 Nm
• Shaft diameter: 6 – 102 mm
• cost-effective standard series

• conical hub on both sides
• straight bellow – long design
• Torque range: 25 – 2.500 Nm
• Shaft diameter: 10 – 102 mm
• low storing forces – high torsional stiffness

• Torque range: 4.000 – 70.000 Nm
• 3-parted construction- easy to fit – variable in use
• flange hub or conical ring hub
• Shaft diameter: 60 – 220 mm
• backlash free – exact torque transfer
• high torsional stiffness – low moments of inertia
• high tolerance of shaft displacements

• conical hub on both sides – aluminium design
• ”high speed- version” for a speed up to 57.000 rpm
• low mass moment of inertia – high balance quality
• Torque range: 25 – 700 Nm
• Shaft diameter: 6 – 60 mm

• for direct mounting in a hollow shaft
• 4-corrugation bellows – short design
• Torque range: 2 – 600 Nm
• Shaft diameter: D1: 3 – 68 mm / D2: 8 – 48 mm
• internal axial buffer

• several hub variants with a backlash free nose groove principle
• blind assembly (plug in) possible – backlash free
• sturdy whole metal version for temperatures up to 200°C
• Torque range: 10 – 600 Nm
• Shaft diameter: 6 – 70 mm

• for standardized interface connection DIN – EN – ISO 9409 – 1
• two-part connection flange
• compact design
• Torque range: 40 – 2000 Nm
• shaft diameter: 12 – 90 mm
• simple installation with radial EASY-clamping hub at output side

• With flange hubs on both sides for variable attachment
• 2 – 4 – 6 – corrugated metal bellows
• high operating speeds / rotationally symmetrical design
• Customer-specific flange designs available on request